T24-Ante; Mounting; Specification - Mantracourt T24-ACMi-SA User Manual

T24-ANTE

This surface mounting antenna provides a robust antenna solution and is fitted with a 100 mm UFL connector for
direct connection to transmitter modules. This can be mounted on metal or plastic enclosures or bulkheads. This
option is useful when the antenna is to be mounted close to the radio module.

Mounting

Mounting requirements are a 10 mm diameter hole through a maximum material thickness of 3.0 mm if the nut
and shake-proof washer are used, or thicker if the self-adhesive pad alone is used. It should be oriented so that
the broad face points toward the remote device i.e. if it is to link to devices passing overhead then the broad face
should be uppermost. Dimensions: 53 mm diameter, 19 mm puck height, 6 mm stud length

Specification

Gain: 3.0 dBi
Type: Inverted F Printed circuit antenna
Connection: 60 mm cable terminated UFL plug
Environmental Protection: IP69K
Mantracourt Electronics Limited
416
T24 Telemetry User Manual