Output Scaling - Mantracourt T24-ACMi-SA User Manual

Output Scaling

Use this page to scale the data displayed on the T24-LD1. This may be used, for example, to convert the data
from a transmitter module calibrated in kg so that the T24-LD1 display shows the value in tonnes.
Parameters:
Output scaling
Mantracourt Electronics Limited
This can be used to change the displayed value to a different unit or to otherwise
scale it. You simply enter the original and required values at a low and high point.
Example: If a Transmitter module was supplying data in kg and you wanted to
display in tonnes. You would keep both the low points at zero. Enter At High
Input Value of 1000 and Display Should Read Value of 1.
275
T24 Telemetry User Manual