Entering And Starting A Program; Switching To Programming Mode - Siemens LOGO! 24RC Manual

3.6 Entering and Starting a Program

You have designed a circuit and now want to enter it in
LOGO!. The example below illustrates how to do this.

3.6.1 Switching to Programming Mode

Connect LOGO! to the mains and switch on the power. The
following message appears on the display:
No Program
Switch LOGO! to programming mode To do this, press the
keys ,
to press the keys simultaneously prevents anyone pressing
them and switching to programming mode inadvertently.
No Program
When you press the keys, LOGO!'s main menu appears:
>Program..
PC/Card..
Start
On the left in the first line you will see ">". Use the keys
and
"Program.." and press OK. LOGO! switches to the pro-
gramming menu.
LOGO! Manual
A5E00067781 01
and OK at the same time. The fact that you have
to move the ">" up and down. Move the ">" to
Programming LOGO!
LOGO!'s main menu
39