Display Of Flame Current Qrb... Or Qrc - Siemens LME7 Series Basic Documentation

Note
This display is only possible in operating mode or standby!
-
-
1...3 s
-
>3 s
Building Technologies
HVAC Products
21.3.3

Display of flame current QRB... or QRC...

Basic Documentation LME7...
21 Operation via internal LED
-
Press button for display of flame signal amplifier.
The signal lamp flashes green.
The display shows FL.2 .
When pressing (1...3 seconds)
current will be displayed.
The signal lamp flashes green.
Example: 1.1
When pressing (>3 seconds)
number begins flashing.
When the button is released, the value will be displayed for
2 minutes.
The signal lamp flashes green.
After this time the normal display will be displayed.
Display: Point . flashes, value 11 does not.
-
button, the flame signal
+
button, the point after the
106/164
CC1P7105en
13.10.2009