Waterproofing Without Using A Cold-Shrinkable Tube - JRC NTG337-EL0 Instruction Manual

from a small window to the Ethernet cable side by 1/2 coming in succession, and 1 return
round trip to the small window side.
Self-bonding tape part

7.12. Waterproofing Without Using a Cold-Shrinkable Tube

If installing a cold-shrinkable tube fails, use off-the-shelf self-bonding tape to provide the
waterproofing.
(1) Securing the small Lid of the WT and the spacer
Using an appropriate length of self-bonding tape, wrap the tape around both the small Lid of
the WT (at its base) and spacer one complete turn. After one turn, wrap about seven turns
around the Ethernet cable by overlapping one-half of the previous turn. Reverse the wrapping
direction and wrap about another seven turns back to the small Lid.
START
END
7-143