6.13. Testing
6.13.1.
Perform a continuity test
Connect the OpS terminal to an AP, and run a loopback test with the following procedure:
Step 1: Click the Testing tab.
Step 2: Select a WT from the Select WT ID list.
Step 3: Select "Loop back Test."
Step 4: Click the Execute button to start the test.
Step 5: Check the test result:
-
Accept
Result
-
Received frame length
-
-
Transmittion time
Step 2
: OK
: OK
: 516
: The result will vary depending on the distance.
Figure 6-54 Perform a continuity test
6-108
Step 1
Step 3
Step 4
Step 5