6.10. Waterproofing WT small window
(1) Pass the Ethernet cable through the cold-shrinkable tube (a) from the bonded portion of the
spiral tube. Pay attention to the insertion direction (Figure 6-45).
Applicable LAN cable diameter: 5.0 mm to 5.7 mm
Components of CS sleeve
(d) Spacer
(a) Cold-shrinkable tube
Figure 6-44
(2) Connect the Ethernet cable to the WT (Figure 6-46).
(3) Using cable ties (c) or the like, secure the Ethernet cable to the supporting bracket. Attach the
cable ties 70 to 100 mm from the end of the supporting bracket. The cable is approximately
300 mm long measured from the cable joint (with a diameter of approximately 200 mm) to the
first cable tie (Figure 6-47).
Figure 6-46
(e) Spiral tube
(b) Ethernet cable
Pay attention to the irection
300mm
6-100
Bonding portion of the spiral
tube for the cold-shrinkable
Figure 6-45
(c Cable ties
φ200mm
Figure 6-47