JRC NTG337-EL0 Instruction Manual page 105

After installing the adaptor
Figure 6-13
3. Attachment of the WT to the antenna
1) V(ertical) polarization
When using the V polarization, the guide pin of the WT should be turned to right above and inserted into
the V guide hole of the plate. (Figure 6-14 & Figure 6-15)
V guide hole
Plate
Guide pin
ＷＴ ＥＬ２
Ｉ Ｃ： ７６ ８ Ｂ−Ｎ Ｔ Ｇ３ ３７ 注５
ＭＯ Ｄ Ｅ Ｌ： Ｎ Ｔ Ｇ −３ ３ ７ 注２ Ｒ
ＥＴ Ｈ ＥＲ
Figure 6-14
V polarization
Figure 6-15
6-82