Connecting Cables To The Wt - JRC NTG337-EL0 Instruction Manual

6.9. Connecting Cables to the WT

Use an Ethernet cable (straight) to connect the WT and the WT adapter as shown in Figure 6-43.
WT
Cold-shrinkable tube
User Terminal
MDI
Ethernet cable (Straight)
MDI-X
WT adapter
AC adapter
Figure 6-43 Connecting Cables to the WT
6-98
Rubber
Small Lid
Spacer
Cold-shrinkable tube
You will need a Torx screwdriver (VESSEL
T20H-120) to open the small cover of the WT
Small Window