Download Print this page

JRC NTG337-EL0 Instruction Manual Page 6

Fwa system.
Hide thumbs

Advertisement

Cautions
Don't use organic solvent for cleaning such as thinner and benzene because
this may damage the coating. Just wipe the surface with a clean dry cloth.
Befour plugging in or unplugging the coaxial cable between the AP-RFU and
AP-IFU, turn the power off.
The DC -48V power supply voltage for AP-IFU shall be SELV or TNV-1
depending on the network environment (0 or 1) acc. to IEC62102.
The Equipment for connection to AP-IFU Ethernet-interface(RJ-45) shall be
appropriate to connect to TNV-1 circuits.
The Equipment for connection to WT adapter PC-interface (RJ-45) shall be
appropriate to connect to TNV-1 circuits.
For the connection WT adapter to WT and a cable suitable for outdoor use
shall be installed.
For the connection Terminal Equipment to AP-IFU and a cables suitable for
outdoor use shall be installed.
For the connection AP-IFU to AP-RFU and a coaxial cable suitable for outdoor
use shall be installed.
V

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: