Download Print this page

JRC NTG337-EL0 Instruction Manual Page 93

Fwa system.
Hide thumbs

Advertisement

Step 5: If the procedure ends abnormally, the Under Control dialog box appears.
Check if the cable between the IFU and RFU is too long and there is a contact
failure at the connector section.
Figure 5-28 Cable Loss Measurement Error
Step 6: If the procedure ends normally, the Under Control dialog box appears.
Check if the cable between the IFU and RFU is connected correctly.
Figure 5-29 Time out
5-70

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: