6.6.2. Installing the WT (ExternalΦ60cm Antenna)
1. Φ60cm antenna installation procedure
1) According to the antenna manual of RADIO WAVES, INC., set it up on the pole. (Figure 6-20)
2) Spread specified grease on the O-ring.
The spreading method depends on the
manual. (Figure 6-21)
O-ring
Figure 6-21
2. WT installation procedure
Attach the antenna adaptor to the WT with the O-ring using four M3 screws. (Figure 6-22 & Figure 6-23)
Tightening torque:57 N・cm
WT
Figure 6-20 Φ30cm antenna
Adaptor
O-ring
M3 screws
Figure 6-22
6-85