Download  Print this page

Siemens 1LA8 Operating Instructions Manual Page 52

Simotics tn series n-compact induction motor.
Hide thumbs

Advertisement

Assembly
5.2 Lift the machine to where it will be installed, and position it
The machine can tip over, slip or fall down during transport if a different construction is used
If you do not transport or lift the machine in a position appropriate for its construction, the
machine can tip, slip into the lifting equipment or fall down. This can result in death, serious
injury or material damage.
● Use only the load carrying device on the stator frame for lifting.
● Use the load carrying device appropriate for the machine position.
● Use suitable rope guiding or spreading devices. The weight of the machine is shown on
The machine can fall over, shift or fall down during transport if the center of gravity is not
symmetrical
If the center of gravity of a load is not located centrally between the attachment points, the
motor can tip over or slip out of the lifting equipment and fall when it is being transported or
lifted. This can result in death, serious injury or material damage.
● Comply with the handling instructions on the machine when transporting it.
● Be aware of the possibility of different loads on the sling ropes or lifting straps and the
● Always take account of the center of gravity when transporting or lifting the motor. If the
Note
Place the machine in a secure and raised position
In order to obtain easy and safe access to the underside of the machine, place it in a secure
and raised position.
Standing under suspended loads
If the lifting gear or load handling attachments were to fail, the machine could fall. This can
result in death, serious injury or material damage.
Never remain under or in the immediate vicinity of the machine when it is raised.
52
WARNING
the rating plate.
WARNING
carrying capacity of the lifting equipment.
center of gravity is not located centrally between the attachment points, then position the
hoisting hook above the center of gravity.
DANGER
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 05/2014

Advertisement

   Related Manuals for Siemens 1LA8

Comments to this Manuals

Symbols: 0
Latest comments: