Download  Print this page

Siemens 1LA8 Operating Instructions Manual Page 107

Simotics tn series n-compact induction motor.
Hide thumbs

Advertisement

Criteria
Solid matter content, particle sizes >
25 µm
Suitability of bearings
Speed characteristic nxdm
If different special lubricating greases are stated on the lubricant plate, then different criteria apply.
Note
Deviating operating conditions and characteristics
Only those greases named on the lubricant plate may be used.
If the operating conditions and characteristics differ from those mentioned, other greases
may be used only after consultation with the manufacture.
Note
Use of other greases
If greases other than those named on the lubricant plate are used, it cannot be guaranteed
that they are compatible with the complete system.
If you use greases that satisfy only the minimum requirements of DIN 51825 or ISO 6743-9,
then reduce the lubrication intervals by half or adapt them as appropriate. If in doubt, consult
the manufacturer.
Recommended greases for roller bearings
For standard applications, the following high-quality greases are recommended for roller
bearings for vertical and horizontal motor constructions due to their technical properties:
Table 9-4
Manufacturer
Shell
ExxonMobil
Esso
BP
Fuchs
Lubcon
Addinol
FAG
For motors of horizontal construction you can alternatively use greases with NLGI class 2.
However, this reduces the lubrication interval by 20%.
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 05/2014
Standard
DIN 51813
-
Roller bearing greases for vertical and horizontal types of construction
Grease type
Gadus S2 V100 3
Unirex N3
Energrease LS3
Renolit H443 HD88
Turmoplex 3
LM 3 EP
Arcanol Multi 3
Property, characteristic value
< 10 mg/kg
Suitable for the built-in motor bearings, seals and
these speeds
Maintenance
9.1 Inspection and maintenance
Unit
mg/kg
-
mm/min
107

Advertisement

   Related Manuals for Siemens 1LA8

Comments to this Manuals

Symbols: 0
Latest comments: