Download  Print this page

Siemens 1LA8 Operating Instructions Manual Page 146

Simotics tn series n-compact induction motor.
Hide thumbs

Advertisement

Technical data
B.1 Tightening torques for screw and bolt connections
● Case A
● Case B
● Case C
See also
Rotor shipping brace (Page 34)
146
Applies to electrical connections in which the permissible torque is normally limited by the
bolt materials and/or the current carrying capacity of the insulators, with the exception of
the busbar connections in case B.
Applies to bolts screwed into components made from materials with lower property class
(e. g. aluminum) and to bolts with property class 8.8 according to ISO 898-1.
Applies to bolts with property class 8.8 or A4-70 according to ISO 898-1, however only to
bolts screwed into components made from materials with higher property class, e.g. cast
iron, steel or cast steel.
Note
Non-standard tightening torques
Different tightening torques for electrical connections and bolted connections for parts with
flat seals or insulating parts are specified in the relevant sections and drawings.
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 05/2014

Advertisement

   Related Manuals for Siemens 1LA8

Comments to this Manuals

Symbols: 0
Latest comments: