Dedicated Ilo Port Management Module Option - HPE ProLiant ML150 Gen9 User Manual

Install the system air baffle (on page 22).
14.
If removed, install the PCI air baffle
15.
Install the access panel (on page 19).
16.
Return the server to an upright position.
17.
Connect each power cord to the server.
18.
Connect each power cord to the power source.
19.
Power up the server (on page 17).
20.
Install and lock the tower bezel
21.

Dedicated iLO port management module option

To install the component:
Unlock and remove the tower bezel
1.
Power down the server (on page 17).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
4.
Remove the access panel (on page 18).
5.
If installed, remove the PCI air baffle (on page 20).
6.
Remove the system air baffle (on page 22).
7.
IMPORTANT: The dedicated iLO port management module is installed in PCIe expansion
slot 7.
Open the slot latch and remove the PCIe blank.
8.
("PCI air baffle option" on page 57).
("Install the tower bezel" on page 18).
("Remove the tower bezel" on page 17).
Hardware options installation 60