HPE ProLiant ML150 Gen9 User Manual page 84

Box 1
o
Connect the drive cage cables:
13.
Connect the Mini-SAS cable to the drive cage backplane.
a.
Route the Mini-SAS cable through the cable management clip, and then connect the opposite
b.
end of the Mini-SAS cable to the connector on the system board.
Connect the power cable to the drive cage backplane.
c.
Route the power cable through the cable management clip, and then connect the opposite end of
d.
the power cable to the connector on the system board.
—
Box 2
Hardware options installation 84