System Maintenance Switch - HPE ProLiant ML150 Gen9 User Manual

Item
25
26
27
28
29
30
31
32
33
34
35
36

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
To access the redundant ROM, set S1, S5, and S6 to On.
When system maintenance switch S6 is set to the On position, the system is prepared to erase all system
configuration settings from both CMOS and NVRAM.
IMPORTANT: Before using the S7 switch to change to Legacy BIOS Boot Mode, be sure the
HPE Dynamic Smart Array B140i Controller is disabled. Do not use the B140i controller when
the server is in Legacy BIOS Boot Mode.
NMI functionality
An NMI crash dump creates a crash dump log before resetting a system which is not responding.
Crash dump log analysis is an essential part of diagnosing reliability problems, such as failures of
operating systems, device drivers, and applications. Many crashes freeze a system, and the only
Description
System maintenance switch
Fan connector 2
System battery
NMI header
microSD slot
Dedicated iLO port connector
Slot 6 PCIe3 x8 (8, 4, 1) for Processor 1
Slot 5 PCIe3 x16 (16, 8, 4, 1) for Processor 1
Slot 4 PCIe3 x8 (8, 4, 1) for Processor 1
Slot 3 PCIe3 x16 (16, 8, 4, 1) for Processor 2
Slot 2 PCIe3 x8 (8, 4, 1) for Processor 1
Slot 1 PCIe3 x8 (8, 4, 1) for Processor 2
Default Function
Off Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
Off Off = System configuration can be
changed.
On = System configuration is locked.
Off Reserved
Off Reserved
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = No function
On = ROM reads system
configuration as invalid.
Off Off = Set default boot mode to UEFI.
On = Set default boot mode to legacy.
— Reserved
— Reserved
— Reserved
— Reserved
— Reserved
Component identification 11