Pci Air Baffle Option - HPE ProLiant ML150 Gen9 User Manual

Install fan 1.
16.
Install the system air baffle (on page 22).
17.
If removed, install the PCI air baffle
18.
Install the access panel (on page 19).
19.
Return the server to an upright position.
20.
Connect each power cord to the server.
21.
Connect each power cord to the power source.
22.
Power up the server (on page 17).
23.
Install and lock the tower bezel
24.

PCI air baffle option

Install the PCI air baffle option when a PCI expansion card is installed in the server.
To install the component:
Unlock and remove the tower bezel
1.
Power down the server (on page 17).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
4.
Remove the access panel (on page 18).
5.
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed.
("PCI air baffle option" on page 57).
("Install the tower bezel" on page 18).
("Remove the tower bezel" on page 17).
Hardware options installation 57