Expansion Board - HPE ProLiant ML150 Gen9 User Manual

Install the fans (on page 24).
10.
Install the system air baffle (on page 22).
11.
If removed, install the PCI air baffle
12.
Install the access panel (on page 19).
13.
Connect each power cord to the server.
14.
Connect each power cord to the power source.
15.
Power up the server (on page 17).
16.
Install and lock the tower bezel
17.

Expansion board

NOTE: A second processor option is required to install an expansion board in PCIe slot 1 or
3.
To install the component:
Unlock and remove the tower bezel
1.
Power down the server (on page 17).
2.
Remove all power:
3.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Place the server on its side.
4.
Remove the access panel (on page 18).
5.
If installed, remove the PCI air baffle (on page 20).
6.
Remove the system air baffle (on page 22).
7.
Select the appropriate PCIe slot to install the expansion board.
8.
Remove the PCIe blank.
9.
("PCI air baffle option" on page 57).
("Install the tower bezel" on page 18).
("Remove the tower bezel" on page 17).
Hardware options installation 51