Power Supply Specifications - HPE ProLiant ML150 Gen9 User Manual

Power supply specifications

Depending on the installed options and/or the regional location where the server was purchased, the
server is configured with one of the following power supplies:
•
HPE 550 W Power Supply
•
HPE 800 W / 900 W Gold AC Power Input Module
This is supported when the two-bay HPE RPS Backplane is installed. The module wattage rating
changes depending on whether one or two power input modules are installed in the server:
One power input module installed (non-redundant): 900 W
o
Two power input modules installed (redundant): 800 W
o
•
HPE 900 W AC 240VDC Power Input Module
This is supported when the two-bay HPE 900 W AC 240VDC RPS Power Backplane option is
installed.
The 240 V DC function of this module is intended for server installations based in China.
o
These are Entry Level Power Supply products for ProLiant servers. For more information about the power
supply features, specifications, and compatibility, see the Hewlett Packard Enterprise website
(http://www.hpe.com/servers/powersupplies).
CAUTION: Check the system and power supply input ratings before powering up the server.
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, see the Hewlett Packard Enterprise Power Advisor website
(http://www.hpe.com/info/poweradvisor/online).
Specifications 121