Front Panel Leds And Buttons - HPE ProLiant ML150 Gen9 User Manual

Front panel LEDs and buttons

Item Description
Health LED
1
NIC status LED
2
Power On/Standby button
3
and system power LED
1 To identify components in a degraded or critical state, review the system IML or use iLO to review the system health
status.
2 Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.
Status
Solid green = Normal 1
Flashing green (1 flash per second) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 flash per second) = System critical
Solid green = Link to network
Flashing green (1 flash per second) = Network active
Off = No network activity
Solid green = System on
Flashing green (1 flash per second) = Performing power on sequence
Solid amber = System in standby
Off = No power present 2
Component identification 7