HPE ProLiant ML150 Gen9 User Manual page 89

If installed, remove the PCI air baffle (on page 20).
6.
Remove the system air baffle (on page 22).
7.
CAUTION: Any attempt to remove an installed TPM from the system board breaks or
disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed
TPM, administrators should consider the system compromised and take appropriate measures
to ensure the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board.
8.
Install the TPM security rivet by pressing the rivet firmly into the system board.
9.
Install the system air baffle (on page 22).
10.
If removed, install the PCI air baffle
11.
Install the access panel (on page 19).
12.
Return the server to an upright position.
13.
Connect each power cord to the server.
14.
Connect each power cord to the power source.
15.
Power up the server (on page 17).
16.
Install and lock the tower bezel
17.
("PCI air baffle option" on page 57).
("Install the tower bezel" on page 18).
Hardware options installation 89