Table of Contents
Advertisement
Configuration
Purpose
Places the IGP/PGL in the Configuration mode, where changes to any or all
of the IGP/PGL configuration parameters via software control can be made
instead of from the printer control panel.
Mode
NORMAL
NOTE:
A separate line is required for the CONFIG command, the parameters and
values, and the END command.
Format
(cc)CONFIG
parameter;value
END
(cc)
CONFIG
parameter;value
END
AUTO WRAP
AUTO EJECT
CARRIAGE RETURN DEF
LINE FEED DEF
4–34
The Special Function Control Character (SFCC).
The Configuration command; enter CONFIG.
The parameter for which a configuration change is
desired, and the value associated with that parameter.
The available parameters are listed in Table 4–2, and
the associated values are shown in Table 1–4 on page
1–13.
Terminates the CONFIG command; enter END.
Table 4–2. CONFIG Command Parameters
LEFT MARGIN
RESET
SFCC
SKIP PREFIX
SLEW RANGE
TOP/BOTTOM MARGIN
UPPERCASE
Commands
Advertisement
Table of Contents
