Table of Contents
Advertisement
ALPHA
[R;][E;][Cn;][AFn;L;][DIR;][UC;][DARK;]SR;SC;VE;HE;(D)text(D)
STOP
9.
HandCraft Boats uses bar code type Code 128B (C128B) in many
applications. Use bar code C128B, height (Hn) of .5–inch, starting at
row (SR) 49, column (SC) 59, code the West Coast Sales Region as
*WC*, and print the data field (PDF) below the symbol.
NOTE: Due to space constraints, the C128B command below is separated
Enter
BARCODE
C128B;H5;49;59
*WC*
PDF
STOP
NOTE: The decimal point is not entered in the height parameter (H5) above
10. Add the logo and end the Create Form mode. Use the Logo Call
command, specify the starting row (SR) at 12 and column (SC) at 18 as
shown on the grid and call the logo by name (HANDCRFT). (The
starting row and column of the logo refer to the upper left corner of the
grid used in the logo design.)
Enter
LOGO
12;18;HANDCRFT
STOP
END
6–44
into two lines. During actual input, do not separate the command
parameters.
because values are expected in .10–inch increments. Values from 4
to 99 (.4–inch to 9.9 inches) are accepted.
Format
BARCODE
C128B;[VSCAN;][MAG;][Hn;][BFn;L;]
[DARK;]SR;SC
[(D)datafield(D)]
[PDF[;LOC][;FONT]]
STOP
Format
LOGO
SR;SC;logoname[;DISK]
STOP
END
Form Examples and Exercises
Advertisement
Table of Contents
