Ignore Sequence
Purpose
Enables the IGP/PGL to ignore all characters after the Ignore Sequence On
(IGON) command is entered. All characters are ignored until the Ignore
Sequence Off (IGOFF) command is entered.
Mode
NORMAL, CREATE, or EXECUTE
Format
(cc)IGON or (cc)IGOFF
NOTE:
A line terminator is not required in the Ignore Sequence.
(cc)
IGON
IGOFF
Comments IGON and IGOFF can also be used anywhere in the data stream.
NOTE: Commands in PTX_SETUP and control characters used to
Commands
The Special Function Control Character.
Ignore Sequence On command; enter IGON.
Exits Ignore Sequence
download TIFF and PCX logos are not ignored.
4–65