Delete Form - Printronix ThermaLine Series Programmer's Reference Manual

Delete Form

Purpose Deletes the form identified by the form name from the directory and the
IGP/PGL memory.
Mode NORMAL
Format (cc)DELETE FORM; formname [;DISK]
(cc)
DELETE FORM
formname
DISK
NOTE: *ALL cannot be used in conjunction with DISK parameter.
Comments For more information, refer to the Directory Example and the Delete
Example on pages 6–47 and 6–48.
Example The following command deletes the form named "PAY#" from the
directory, IGP/PGL memory, and the printer external memory.
~DELETE FORM;PAY#;DISK
Commands
The Special Function Control Character.
The Delete Form command; enter DELETE FORM.
Identifies the form to be deleted. Enter the name of the
form exactly as it was created. You can delete an entire
form directory by inputting *ALL as the form name.
Optional parameter to delete the form from the printer
external memory module where it was originally
stored. Enter DISK.
4–41