Delete Logo - Printronix ThermaLine Series Programmer's Reference Manual

Delete Logo

Purpose Deletes the logo identified by the logo name from the directory and the
IGP/PGL memory.
Mode NORMAL
Format (cc)DELETE LOGO; logoname [;DISK]
(cc)
DELETE LOGO
logoname
DISK
Comments Printing a form that contains a deleted logo will produce an error message.
For more information, refer to the Directory Example and the Delete
Example on pages 6–47 and 6–48.
Example The following command deletes the logo named "MEMO" from the
directory, IGP/PGL memory, and the printer external memory.
~DELETE LOGO;MEMO;DISK
4–42
The Special Function Control Character.
The Delete Form command; enter DELETE LOGO.
Identifies the logo to be deleted. Enter the name of the
logo exactly as it was created. You can delete an entire
logo directory by inputting *ALL as the logo name.
Optional parameter to delete the logo from the printer
external memory module where it was originally
stored. Enter DISK.
Commands