Table of Contents
Advertisement
Execute Form: General Format
Purpose
Prints forms created in the CREATE mode.
Mode
NORMAL
Format
(cc)EXECUTE ;formname [;PAGEn] [;FC] [;ICNTn] [;IRSTn]
[(cc)AFn; (D)ASCII text(D)]
[(cc)BFn; (D)data(D)]
[(cc)IAFn; [idir] STEPMASK; [RPTn;] [RSTn;] (D)STARTDATA(D)]
[(cc)IBFn; [idir] STEPMASK; [RPTn;] [RSTn;] (D)STARTDATA(D)]
[Overlay Data]
[Form Feed character]
(cc)NORMAL
(cc)
EXECUTE
formname
PAGE n
Commands
The Special Function Control Character.
The Execute Form command; enter EXECUTE.
Identifies a previously defined form by name. Enter the
form name exactly as used when created.
The optional Pagination command; enter PAGE and
replace n with the decimal number of the starting page
in a sequence of multiple pages. The number may be
eight digits long and range between 0 and 99999999.
The next page after 99999999 is 0. Leave a blank
space between the PAGE command and the n value.
The page number will print on the form in the location
defined by the Page Number command in the Create
Form mode. If the location of the pagination field was
not specified in the Create Form mode, the page field
is printed in the upper left corner of the form.
4–51
Advertisement
Table of Contents
