Tiff Logo - Printronix ThermaLine Series Programmer's Reference Manual

TIFF Logo

Purpose Places the IGP/PGL in the Create Logo mode, where logos can be defined
using a Tagged Image File Format (TIFF).
Mode NORMAL
Format (cc)(LOGO;logoname;TIFF[;DISK](T)
<TIFF raster data> (cc) RASTEREND [T]
END(T)
(cc)
LOGO
logoname
TIFF
DISK
T
TIFF raster data
(cc)
RASTEREND
END
4–92
The Special Function Control Character.
The Logo command; enter LOGO.
Enter a maximum of 12 alphanumeric characters for
the name of the logo. (Refer to page 4–5 for a list of
allowable Logo Name characters.) All future
references to this logo (Delete Logo or Logo Call
commands) must use this name. If a logo is defined
with the same name as a logo already existing in
memory, the newly defined logo will replace the
existing logo.
The command denoting raster data in TIFF format;
enter TIFF.
Optional parameter to store the logo in the IGP/PGL
external memory module. Enter DISK.
Line terminator.
Scanned data in TIFF format; data must be black and
white. Grey scales or color TIFF files are currently not
supported. Both uncompressed and packed–bits
compression formats are supported.
The Special Function Control Character.
Denotes the end of the TIFF raster data. Enter
RASTEREND.
Terminates the TIFF logo; enter END.
Commands