Ocr Character Sets - Printronix ThermaLine Series Programmer's Reference Manual

OCR Character Sets

Purpose Accesses OCR–A and OCR–B character sets.
Mode
CREATE, NORMAL and EXECUTE
Format
See Comments
Comments In the Create mode, you can access OCR fonts using the alphanumeric
command. Use the Cn parameter in the ALPHA command ("Commands"
chapter, page 4–12) for more information.
In the Normal and Execute modes, you can access OCR fonts using the
Compressed Print (Density) command ("Commands" chapter, page 4–33).
NOTE: OCR fonts are only available in 10 cpi.
7–6 Multinational Character Sets