Table of Contents
Advertisement
Reset
Purpose
Deletes all forms and logos from IGP/PGL memory. The Reset performs
the following tasks:
Prints any objects in the current page
Selects the portrait orientation
Deletes all forms and logos resident in memory
Sets the font to the default Gothic 12 point/10CPI
Releases all user–defined character mappings
Runs the SETUP file if present
Mode
NORMAL, CREATE, or EXECUTE
Format
(cc)RESET
(cc)
RESET
Comments This command deletes all forms and logos, including those input by other
operators on shared IGP/PGL systems. To prevent the loss of information
contained in the 2K–byte input buffer of the serial interface, the Reset
command sequence must be the last item sent to the printer.
Wait several seconds after issuing a RESET command before sending
another IGP/PGL command. The RESET process must be thoroughly
completed before new IGP/PGL data is sent, or new data may be lost or
damaged.
Commands
The Special Function Control Character.
The Reset command; enter RESET.
IMPORTANT
4–85
Advertisement
Table of Contents
