Ptx_Setup Command Example; Ptx_Setup - Printronix ThermaLine Series Programmer's Reference Manual

ALM_NARROW;#
Defines the Automatic Label Mapping narrow–web width in
1/1000ths–of–an–inch increments from 0–65535.
ALM_ENABLE;<value>
Enables or disables the ALM. The value 'N' or 'W' enables the ALM. A
"D" disables the ALM. An 'N' defines a page as "narrow." A 'W' defines a
page as "wide."
IMAGE_SHFT_H;#
Defines the horizontal image shift in 1/1000ths–of–an–inch increments from
(–1000)–(1000).
IMAGE_SHFT_V;#
Defines the vertical image shift in 1/1000ths–of–an–inch increments from
(–1000)–(1000).
LENGTH;#
Defines the page length in 1/1000ths–of–an–inch increments. The range of
values is dependent upon the printer. (Refer to the Setup Guide for your
printer.)
REWIND;#
Enables or disables the rewind function. A zero value disables rewind and a
'1' value enables the rewinder.
WIDTH;#
Defines the page width in 1/1000ths–of–an–inch increments. The range of
values is dependent upon the printer. (See the printer manual.)

PTX_Setup Command Example

!PTX_SETUP

ENGINE–LENGTH;11000:WIDTH;8500.
PTX_END
This example sets page dimensions to 8.5" wide by 11" long.
3–6 PTX_Setup