Table of Contents
Advertisement
77
EXECUTE format or delimiter error
A format or delimiter error was detected in the Execute command; the
IGP/PGL will automatically revert to the Normal mode. This error is usually
caused by one or more of the following:
a. A missing semicolon;
b. A colon in place of a semicolon;
c. Too many or too few parameters in the command string;
d. Alpha characters instead of decimal digits in the parameters;
e. Page command misspelled when specifying the page number.
78
Insufficient memory to EXECUTE the form
Insufficient memory was available to recall and execute a form. The
IGP/PGL will automatically revert to the Normal mode.
79
Not defined.
Error Codes
8–15
Advertisement
Table of Contents
