Reverse Print Errors - Printronix ThermaLine Series Programmer's Reference Manual

Reverse Print Errors

111 REVERSE format error in input parameters
Re–enter the command with proper format.
112 REVERSE starting row SR/ending row ER out of bounds
Exceeds the value specified to reverse the element.
113 REVERSE starting SC/ending column EC out of bounds
Exceeds the value specified to reverse the element.
114 Insufficient memory to store the REVERSE element
Insufficient memory space available for reversed print requirements.
115–116 Not defined.
117 Unusable or illegal raster data.
118 Unsupported raster image type.
119 Unsupported raster compression type.
120–125 Not defined.
126 LFORMx form length parameter n error
The number of lines exceeds 66 (for 6 lpi) or 88 (for 8 lpi) lines when using
the LFORMx command.
127 Form length > physical page length
The form length specified exceeds the paper size loaded in the printer.
128 FORM/LOGO name is not a legal file name
The file name exceeds the twelve-character limitation, or an invalid character
was used in the file name. Refer to IGP/PGL Command Standards in the
"Commands" chapter.
129 Not defined.
Error Codes 8–21