Directory Example - Printronix ThermaLine Series Programmer's Reference Manual

Directory Example

The Directory command lists the contents of the IGP/PGL directory in the
printer system. The directory command provides the following information:
All form names currently defined
All logo names currently defined
The association of logos to forms
The amount of memory used for form storage
The amount of dynamic storage space used and available
A form will not execute unless enough room exists in the memory as
indicated in the work space bytes free portion of the directory listing. To
print the directory, open a file, input the directory command, exit the file, and
print.
For example (see Figure 6–14):
Enter
DIRECT.FOM
~DIRECTORY
PRINT DIRECT.FOM
The Directory command can only be used when the IGP/PGL is in the
Normal mode. Upon completion of the directory listing, the IGP/PGL returns
to the Normal mode. If the IGP/PGL is not in the Normal mode, input the
Normal mode command before the Directory command.
Form Examples and Exercises
Format
(System Format)
(cc)DIRECTORY
(System Format)
Figure 6–14. Sample Printout
6–47