Getting To Know Your Switch - LEGRAND radiant WWRL10WHCCV2 Manual

getting to know your switch

Item Name
1 Paddle Switch
2 LED Locator Light
LED LOCATOR LIGHT EXPLANATIONS
LED State of
Color Light
Blinking White
Blinking Amber
Solid White
RESET TO FACTORY DEFAULT
Deleting a device from the app will reset it to factory defaults. To manually
reset the switch to factory defaults press and hold the off button for 10
seconds until you see the LED blink then release. The device will reset in
about 20 seconds after release.
Description
•
Press the top of the paddle to turn the light
on and the bottom to turn the light off.
•
Indicates the current state of the device.
Refer to "LED Locator Light Explanations"
for detail.
Explanation
Device is updating.
Device is ready for
setup on your network.
Device is connected to
your network and is
switched off.
2
1