Setting Parameters Sls1-4, Sbc, Ss1, Ss2 - Siemens SINUMERIK 828D Function Manual

Example of commissioning with SINUMERIK 828D
5.5 Configuration of the SI functions for the drive
5.5.3

Setting parameters SLS1-4, SBC, SS1, SS2

Checking and adapting motion monitoring
Further settings are required for the configuration of the safely-limited speed.
● For SLS, the four SLS levels must be checked.
● Under "motion monitoring" other functions are listed, which must be checked as to
● The enable must be set when selecting "Safety functions".
Figure 5-22 SERVO: Selecting a safety function
60
whether a parameter must be adapted.
Function Manual, 07/2012, 6FC5397-3EP40-3BA0
Safety Integrated