Protect Against Electrostatic Discharge (Esd); Assembly Replacement Sequence - Agilent Technologies PNA Series Service Manual

PNA Series Microwave Network Analyzers
E8361A

Protect Against Electrostatic Discharge (ESD)

This is important. If not properly protected against, electrostatic discharge can seriously
damage your analyzer, resulting in costly repair.
CAUTION To reduce the chance of electrostatic discharge, follow all of the
recommendations outlined in
page 1-5, for all of the procedures in this chapter.

Assembly Replacement Sequence

After identifying the problem requiring an assembly to be replaced, follow these steps:
Step 1. Order a replacement assembly. Refer to
Step 2. Replace the faulty assembly and determine what adjustments are necessary.
Refer to Chapter 7, "Repair and Replacement Procedures."
Step 3. Perform the necessary adjustments. Refer to
Step 4. Perform the necessary performance tests. Refer to
Adjustments."
Service Guide E8361-90001
Protect Against Electrostatic Discharge (ESD)
"Electrostatic Discharge Protection" on
Chapter 6, "Replaceable Parts."
Chapter 3, "Tests and Adjustments."
Chapter 3, "Tests and
Troubleshooting
4- 3