PNA Series Microwave Network Analyzers
E8361A
Section Title
Preliminary Checks
System Verification
Performance Tests
(Agilent N2721A
a
Software Package)
Adjustments
a. The Agilent N2721A software package must be purchased separately.
Service Guide E8361-90001
Summary of Content
Performing the operator's check.
Checking your test cables.
Perform these checks before performing system
verification.
What the system verification does.
How to perform the verification test.
How to interpret the results.
A brief summary of each performance test in the
Agilent N2721A software package:
•
Source Power Accuracy Test
•
Source Power Linearity Test
•
Frequency Accuracy Test
•
Trace Noise Test
•
System Compression Test
•
Noise Floor Test
•
Calibration Coefficient Test
•
System Crosstalk Test
•
Dynamic Accuracy Test
Setups and procedures for adjusting your analyzer:
•
Source Calibration Adjustment
•
Receiver Calibration Adjustment
•
LO Power Adjustment
•
10 MHz Frequency Reference Adjustment
•
3.8 GHz PMYO Frequency Adjustment
Tests and Adjustments
Information in This Chapter
Start Page
Page 3-10
Page 3-19
Page 3-28
Page 3-41
3- 3