Assembly Replacement Sequence - Agilent Technologies PNA Series Service Manual

Replaceable Parts

Assembly Replacement Sequence

Assembly Replacement Sequence
The following steps describe how to replace an assembly in the network analyzer.
Step 1. Identify the faulty group. Begin with
with the appropriate troubleshooting chapter that identifies the faulty assembly.
Step 2. Order a replacement assembly. Refer to this chapter.
Step 3. Replace the faulty assembly and determine what adjustments are necessary.
Refer to Chapter 7, "Repair and Replacement Procedures."
Step 4. Perform the necessary adjustments. Refer to
Step 5. Perform the necessary performance tests. Refer to
Adjustments."
6-4
PNA Series Microwave Network Analyzers
Chapter 4, "Troubleshooting."
Chapter 3, "Tests and Adjustments."
Chapter 3, "Tests and
Service Guide E8361-90001
E8361A
Follow up