Accessing The Option Enable Utility; Installing Or Removing Options - Agilent Technologies PNA Series Service Manual

PNA Series Microwave Network Analyzers
E8361A

Accessing the Option Enable Utility

To start the option enable application:
• On the menu, point to
System
• The dialog box illustrated in
NOTE Some applications require a keyword that is provided by Agilent. If you do not
have the required keyword, contact Agilent for assistance. Refer to
"Contacting Agilent" on page
Figure B-1 Option Enable Dialog Box

Installing or Removing Options

There are two types of options:
• Hardware option: This option involves some physical change to the analyzer. The option
• Software option: This option involves loading software to initialize your new option.
Use the
Select Desired Option
analyzer. If the option is not available in the list box, select
box will allow you to enter the option number. Enter the option and follow the instructions
on the display.
Service Guide E8361-90001
, and then click
Service
Figure B-1
enable utility allows you to load the software needed for the changes.
The option enable utility is part of this process.
box to select an option to install or remove from your
Option Enable
is displayed.
2-9.
Enter Unlisted Option
Option Enable Utility
Accessing the Option Enable Utility
.
. A dialog
B- 3