Table of Contents
Advertisement
FieldFox Analyzer
Before You Begin
Before checking, verifying, or adjusting the analyzer, refer to the following paragraphs to:
• Make sure the operating environment is within 19 to 27 °C and 5 to 95% humidity.
• Make sure that proper electrostatic discharge (ESD) protection is provided.
• Review the principles of connector care.
Protect Against Electrostatic Discharge (ESD)
This is important. If not properly protected against, electrostatic discharge can seriously damage your
analyzer, resulting in costly repair.
CAUTION
To reduce the chance of electrostatic discharge, follow all of the recommendations
outlined in
this chapter.
Allow the Analyzer to Warm Up
Before testing or adjusting the FieldFox analyzer, allow it to warm up as described under "DUT
Warmup" in the "Getting Started" section of the N7841A help file.
N9927-90003
"Electrostatic Discharge Protection" on page
Tests and Adjustments
Before You Begin
1-5, for all of the procedures in
3-3
Advertisement
Table of Contents
Troubleshooting
