Mitsubishi M80 series Connection And Set Up Manual page 63

M800S/M80 Series Connection and Setup Manual
4 General Specifications
CAUTION
Do not apply any voltage to the connectors other than voltage specified in this manual. Failure to observe this
could cause bursting, damage, etc.
Connect the cables to the designated connectors. Incorrect connections could damage the device.
12V, 5V, and 3.3V output from connectors are to supply the power for dedicated peripheral devices. Do not
use for other equipment to supply the power since we do not guarantee the NC operation by voltage down or
noise sneaking.
(1) USB_F (Front-side USB memory I/F)
(2) USB_B
(3) BL (Display unit backlight I/F)
(4) SDC_F (Front-side SD card I/F)
(5) SDC_B (Back-side SD card I/F)
IB-1501269-F 26