Mitsubishi M80 series Connection And Set Up Manual page 490

M800S/M80 Series Connection and Setup Manual
29 SRAM Open Parameter Screen
Menu when inputting the data type
Menu
Input CHAR into the data type.
CHAR
Input SHORT into the data type.
SHORT
Input LONG into the data type.
LONG
Input DOUBLE into the data type.
DOUBLE
Line
Delete a group in a line where a cursor is placed.
clear
Line
Copy the data of a line where a cursor is placed.
copy
Writes the contents of the data copied (one line) into the line where the cursor is placed.
If the data of the line is changed after the [Line copy] is pressed, the data before change will be written when
Line
pasting it.
paste
Once the line is copied, it can be pasted many times until new area is copied.
Clears all allocation of the parameter in the SRAM open parameter screen.
All
-Data of the group detail will not be cleared.
clear
When parameter No. is set and [INPUT] key is pressed, the group will be displayed with the set parameter
Group
No. at top of the group.
search
A cursor moves to the line of the target group.
The group detail screen corresponding to the group where a cursor is placed will be displayed.
Group
When the group information, where a cursor is placed, is not set, it will be invalid.
details
Menu when inputting the number of data
Menu
Line
Delete a group in a line where a cursor is placed.
clear
Line
Copy the data of one line where a cursor is placed.
copy
Writes the contents of the data copied (one line) into the line where the cursor is placed.
If the data of the line is changed after the [Line copy] is pressed, the data before change will be written when
Line
paste pasting it.
Once the line is copied, it can be pasted many times until new area is copied.
Clears all allocation of the parameter in the SRAM open parameter screen.
All
-Data of the group detail will not be cleared.
clear
When parameter No. is set and [INPUT] key is pressed, the group will be displayed with the set parameter
Group
No. at the top of the group.
search
A cursor moves to the line of the target group.
The group detail screen corresponding to the group where a cursor is placed will be displayed.
Group
When the group information, where a cursor is placed, is not set, it will be invalid.
details
Details
Details
453 IB-1501269-F