Mitsubishi M80 series Connection And Set Up Manual page 535

Date of
Manual No.
revision
Apr.2016 IB(NA)1501269-C (Continued from the previous page)
Oct.2016 IB(NA)1501269-D The contents were corrected to correspond with the system software C1 version.
Chapter composition change
Title of chapter 6 was changed into "Precautions for Connecting"
Former 6.3 to 6.9 were changed into independent chapters (Chapter 7 to 12)
Explanations for connection of drive unit in former 9.3 to 9.5 were moved to a new
chapter 7
Former chapter numbers 7 to 19 were changed into 13 to 24 due to the change of
chapter 6
Chapter number change
Section 4.10.2 was changed into 4.11.3
Chapter 17 was changed into Chapter 25
Appendix 1 to 3 were changed into Chapter 27 to 29
Mistakes were corrected.
The following units were added.
FCU8-DX760 (Operation Panel I/O Unit)
FCU8-DX761 (Operation Panel I/O Unit)
The following chapters and sections were added.
9.2 Connecting with Frame Ground
9.7.4 Example of Wiring CJ42 (FCU8-DX760)
9.8 Connecting with Analog I/O Signal (FCU8-DX761)
13.2.13 J224 Cable
13.3.12 MR-BKS1CBL-A1-H/MR-BKS1CBL-A2-H Cable
13.3.15 MR-PWS1CBL-A1-H/MR-PWS1CBL-A2-H Cable
24 Adjust S-analog Screen
25 Device Open Parameter Screen
26 SRAM Open Parameter Screen
Chapter number change
Due to addition of the chapters as above, the existing chapters were renumbered.
Chapter title change
4.8.2 FCU8-DX750/FCU8-DX760/FCU8-DX761
Correspond with MDS-EMH.
Mistakes were corrected.
Revision details