Mitsubishi M80 series Connection And Set Up Manual page 362

M800S/M80 Series Connection and Setup Manual
17 Setting the Hardware
[Installation method]
(1) Check that the machine power is turned OFF. (If the power is not OFF, turn it OFF.)
(2) Confirm that the control unit LED, 7-segment display, etc., are all OFF.
(3) Open the front cover of the control unit.
(4) Fit the new battery into the battery holder.
(5) Insert the connector connected to the new battery into the BAT connector. Pay attention to the connector
orientation: do not insert backwards.
(6) Close the front cover of the control unit. At this time, confirm that the cover is closed by listening for the "click"
sound when the latch catches.
[M800S]
Battery holder
[M80]
BAT connector
Battery holder
BAT connector
325
Front cover
Battery
Front cover
Battery
IB-1501269-F