Mitsubishi M80 series Connection And Set Up Manual page 387

M800S/M80 Series Connection and Setup Manual
18 Setting Up with M80/M800S SETUP INSTALLER
*4 APLC C language module
- The size of APLC C language module must be 120KB or less.
*5 User cycle
For details of user cycle, refer to "M800/M80 Series Interactive Cycle Insertion (Customization) Specification
manual" ( BNP-C3072-121-0003).
*6 Data storage capacity
Storage capacity of the installation data is as follows:
Custom data (*)
User cycle (*)
APLC C language module (aplc.o)
* For custom screen module, the capacity limit is up to 6MB.
* Storage capacity is calculated on built-in memory; thus, it may be different from the data size on
installation medium.
(2) Insert an SD card of the M80/M800S SETUP INSTALLER into the front-side SD interface.
(3) Turn ON the power while pressing
-> Some time after the start-up screen is opened, "M80/M800S SETUP INSTALLER" is activated with a beep
sound.
IB-1501269-F
Install data
Display unit
Return key.
350
Data storage size
12MB or less
Size on disk
30MB or less
120KB or less Module size
SD card
General description