Mitsubishi M80 series Connection And Set Up Manual page 511

M800S/M80 Series Connection and Setup Manual
33 Appx.3: Displaying Original Logo On Standard Screen
A logo that machine tool builders create can be displayed on the upper left of the standard screen. In order to display the
logo, create a logo file (JPG) and install it. When a logo file is prepared by machine tool builders, the unit name (Base
common parameter #1135 unt_nm) is not displayed.
Logo display position
[Logo file specification]
File name
Storage location (Note 1)
Size (Note 2)
Number of colors (Note 3)
(Note 1) Add the logo file to the installer as well as the customized screen module (Refer to "18. Setting Up with
M80/M800S SETUP INSTALLER" for details).
(Note 2) When the size of the logo file is different from the specified size, the display image may differ from the
actual logo as a result of scaling to fit in the display range.
(Note 3) When the logo file is other than 16-bit color, the display image may differ from the actual color because it
is converted to 16-bit color.
IB-1501269-F
logo.jpg
\Custom\
VGA 22×80 pixels
XGA 32×135 pixels
16 bits
474