Mitsubishi M80 series Connection And Set Up Manual page 156

M800S/M80 Series Connection and Setup Manual
4 General Specifications
[LED]
(1)
(2)
(3)
(4)
Name
(1) RUN (Green)
(2) RDY (Yellow)
(Module status)
(3) STA (Green)
(4) ERR (Red)
(Communication status)
(Note 1) The table above is the same as the layout order of WN563 card.
(Note 2) All LED of WN563 card (RUN, RDY, STA and ERR) are lit during the reset of PROFIBUS-DP module.
(Note 3) The status of PROFIBUS-DP module is displayed by the combination of RUN/RDY.
(Note 4) The status of PROFIBUS-DP communication is displayed by the combination of STA/ERR.
Color Status
Green Lit Lit when PROFIBUS-DP module is normally operated
Green/
Flashing Boot standby
yellow
Yellow Lit Boot error
- Lit No power supply, module failure
Configuration successful, communication
Green Lit regularly
unestablished
Green Lit randomly Configuration failure, stuck error
Green Lit Communicating with slave(s)
Red Flashing Communication is interrupted with at least one slave
Red Lit Communication is interrupted with all the slaves
119
Details
IB-1501269-F